fieldid
เขตข้อมูล | ข้อมูล |
บทคัดย่อ |
THE IMPROVEMENT OF HYDROGEN LOADING TIME TO FIBER BRAGG GRATING FABRICATION PRODUCTIVITY IMPROVEMENT : FBG fabrication technology has been quickly developed. The optical
communication business is highly competitive. The FBG productivity improvement is
an optional to drive on this business. The motivation of this research is to improve the
cycle time of hydrogen loading process from hydrogen loading time reduction for
improve FBG productivity. The objective of hydrogen loading process is to enhance
photosensitivity of fiber. However, the side effect of this process is to increase the
refractive index of fiber core. These two effects of hydrogen affect to the quality of
FBG. Therefore, in this research was studied the effect of hydrogen loading time to
FBG parameter. Hydrogen pressure was controlled at 13 MPa. Hydrogen loading time
were varied at 48, 72, 120, and 192 hours. The standard deviation of FBG parameter
were considered to be a judgment factor. All of hydrogen loading time were accepted
by judgment from the standard deviation of each FBG parameter. However, the
average of writing time in case of hydrogen loading time at 48 hours was fluctuation
more than 72 hours. Therefore, Hydrogen loading time at 72 hours was the best of
hydrogen loading time that can improve FBG productivity, as well as, sustain a
quality of FBG.
|
ผู้แต่ง |
|
ประเภทสิ่งพิมพ์ |
|
ปีที่พิมพ์ |
1 |
เลขหน้า |
63 p |
หัวเรื่อง |
|
หัวเรื่อง |
|
เอกสารฉบับเต็ม |
Center of Academic Resource
Institute of Technology 1771/1, E Building, Fl. 2,
Pattanakarn Rd, Suan Luang, Bangkok, 10250